Ever since Marine Design Corporation released their first product to the boating market, they have exploded in popularity. MDC’s exponential growth is undoubtedly because of their industry changing products, particularly the DriveGuardian and the DriveSync, which continue to be backed by success story after success story by pleasure boaters and high performance race teams alike.

A testament to the durability and effectiveness of the DriveGuardian, both Saris Racing and Smith Brothers Racing were using it during the well known OPA races in Point Pleasant, New Jersey. Known for its usually rough water conditions it was the perfect arena for seeing how effective the DriveGuardian would be for each team. Saris Racing, who has used the DriveGuardian before in previous races, took home first place in class 4, and Smith Brothers Racing took home second place in class 6. Rich Smith who used the race as an opportunity to use the Drive Guardian for the third time says that he is very happy that he had the DriveGuardian for that race.

But MDC has taken another step towards achieving peak performance in the form of the DriveSync. There’s nothing more annoying and potentially dangerous than having your drives and trim go out of alignment and constantly having to re-adjust them. But as we all know hitting the BOTH button is rarely a successful means of evenly adjusting your drives. That’s why MDC  developed the DriveSync, a system that monitors and automatically adjusts your drives so that they stay in perfectly even every time. Because whether you are out for a pleasure cruise or fighting for first in a race, no one wants to have to worry about the drives being even with each other.

Doug Stevenson speaks very highly of the DriveSync which he had installed on both his 388 Skater and 39 Cigarette Top Gun last winter. A perfectionist at heart, Doug’s pet peeve had always been with the lack of synchronicity between drives. Whereas like the majority of boaters today, before he installed the DriveSync, he could never be completely certain if the drives were perfect or not, and the always changing levels created by line slack made establishing a base line nearly impossible.

After the installation, which according to Doug only took a couple hours per boat involving some simple wire connections followed by the actual syncing of the drives, the difference was immediately noticeable.

“I think you’re now getting a true number based on having the drives equal, versus before when you were never quite sure if they were prefect or not. I would definitely recommend it to other boaters, whether racing or pleasure I think it’s a smart move.” – Doug

Sam Tippens who has also been running the DriveSync in his 36 Skater for the better part of the summer is more than pleased with the performance and ingenuity of the design.

“It’s perfect. It makes driving the boat so much easier than before becuase I was always having to chase the slowest drive and bump it up to match the high one, especially in that boat. Messing with the drives was just a distraction. Now I don’t have to think about the drives and can concentrate on everything else.” – Sam

Adding to the benefit of installing the DriveSync is Mike’s (Owner) dedication to both his product as well as his customers.

Mike was always available and just a phone call away. His follow up is very good.” – Doug

“Best improvement I’ve made to the boat hands down especially considering the cost” – Sam

Currently the DriveSync is available at CP Performance and we’ve heard that a package including the DriveSync and the new Mayfair Trim indicators is in the works and set to debut sometime this year.

So make your boating experience easier and safer and give the industry changing DriveSync and DriveGuardian a try today!